How Much Does Home Depot Charge to Install a Toilet in 2026?
How much does Home Depot charge to install a toilet in 2026? For a standard replacement where you buy the toilet separately, Home Depot’s installation labor typically costs $179–$299, and most customers report paying $225–$500 all-in for the service. The base labor fee often starts around $149–$150, and a flat-rate basic installation typically runs $180–$400 depending on your market and the fixture. The toilet itself is not included in that price — a typical new toilet adds $100–$400 on top, so a complete job with a basic two-piece toilet usually lands at $279–$499 in total. The single most important thing to understand is that Home Depot does not employ the installers and publishes no single nationwide price list: the work is done by a licensed local third-party contractor, and your price is the flat-rate quote for your area and your toilet.
That is both the appeal and the catch of the Home Depot route. On the plus side, you get a one-stop purchase — buy the toilet, add installation at checkout, and a vetted local pro does the work, backed by a one-year labor warranty. On the minus side, the “Home Depot price” is really the local contractor’s flat rate, and it can vary by market and by what the standard package covers. A flange repair, a new shut-off valve, or a smart toilet that needs an electrical outlet can push the bill well past the quoted base price. This guide breaks down the real 2026 cost by toilet type, explains exactly how the program works, shows what is included and what costs extra, compares the Home Depot route with Lowe’s and with an independent plumber, and shows how to keep the bill down without ending up with a toilet that rocks or leaks.
For the official description of the service, including what the standard installation covers in your market, see Home Depot’s own Toilet Installation & Replacement page.
Quick-answer table (typical 2026 Home Depot toilet installation costs):
| Item | Typical cost |
|---|---|
| Home Depot installation labor, standard replacement | $179–$299 |
| Base labor fee (starting price) | Around $149–$150 |
| Flat-rate basic installation (by market and fixture) | $180–$400 |
| Most customers’ all-in cost for the service | $225–$500 |
| Real customer report — base install incl. removal and haul-away | $269 |
| Same report — total after a flange fix | $320 |
| New toilet, basic two-piece | $100–$200 |
| New toilet, one-piece | $200–$400 |
| New toilet, comfort-height / elongated | $150–$350 |
| New toilet, smart / bidet | $500–$2,000+ |
| Complete job, basic two-piece toilet installed | $279–$499 |
| Independent plumber, labor for a toilet install | $150–$450 |
| DIY, parts only (wax ring, bolts, supply line) | $50–$100 |
| Standard swap, time on site | About 90 minutes to 2–4 hours |
| Labor warranty | 1 year |
How Much Does Home Depot Charge to Install a Toilet by Toilet Type
The toilet you choose is the single biggest driver of the total bill, because the toilet itself is a separate purchase on top of the installation labor. The labor does not change much between a basic two-piece and a one-piece — the installer does the same job either way — but the fixture price does, and a smart toilet can add electrical work on top. Here is the full picture:
| Toilet type | Toilet price | Installation labor | Typical total installed |
|---|---|---|---|
| Basic two-piece | $100–$200 | $179–$299 | $279–$499 |
| One-piece | $200–$400 | $179–$299 | $379–$699 |
| Comfort-height / elongated | $150–$350 | $179–$299 | $329–$649 |
| Smart / bidet toilet | $500–$2,000+ | $179–$299 | $679–$2,299+ |
| Specialty toilet (extra charge reported) | Varies | $225 base + $150 extra | $375 + toilet price |
Basic two-piece ($279–$499 installed). This is the entry point and the most common Home Depot toilet installation: a standard two-piece toilet — separate tank and bowl — at $100–$200 for the fixture, plus $179–$299 for the labor. Two-piece toilets are the cheapest to buy, the easiest to find in stock, and the simplest to install, which is why most standard replacements land in this range.
One-piece ($379–$699 installed). A one-piece toilet — tank and bowl molded as a single unit — costs $200–$400 for the fixture, plus the same $179–$299 in labor. One-piece toilets are easier to clean, with no seam between tank and bowl for grime to collect, and they look more modern. They are also heavier and bulkier to carry and set, which is why some installers charge toward the top of the labor range for them.
Comfort-height / elongated ($329–$649 installed). Comfort-height toilets — a taller seat, usually 17–19 inches, designed to be easier to sit on and stand up from — and elongated bowls cost $150–$350 for the fixture, plus $179–$299 in labor. This is the category where most homeowners land when they replace a toilet deliberately rather than in an emergency: the extra height and the longer bowl are genuinely more comfortable, and the price premium over a basic round-front two-piece is modest. Measure your bathroom before you buy — an elongated bowl needs about two more inches of clearance in front than a round bowl.
Smart / bidet toilet ($679–$2,299+ installed). A smart toilet or bidet toilet costs $500–$2,000+ for the fixture, plus $179–$299 in labor — and possibly $150+ more if an electrician has to add a GFCI outlet, because a smart toilet needs power within about 3 feet of the fixture. This is the category where the Home Depot standard package is most likely to fall short: the basic installation covers setting the toilet and connecting the water, but a smart toilet’s electrical requirements are a separate trade. Check the manufacturer’s installation instructions — Kohler’s own Smart Toilet Installation Instructions specify a properly grounded GFCI-protected receptacle — before you book.
Specialty toilets. One customer report put the base install at $225, with a $150 extra charge because the toilet was classified as a “specialty” model. If your toilet is unusually heavy, wall-hung, or non-standard in any way, ask before you book whether the standard flat rate applies to it. A $150 surprise on installation day is avoidable with one question at the Service Desk.
How Home Depot Toilet Installation Actually Works
Understanding the process matters as much as understanding the price, because Home Depot toilet installation is not a retail purchase — it is a referral to a contractor, and the experience follows the contractor’s process, not the store’s checkout.
You buy the toilet first. The toilet is not included in the installation price. You buy it online or in-store — Home Depot stocks its own Glacier Bay house brand alongside Kohler, American Standard, and Delta — and add professional installation at checkout, or speak with an associate at the Service Desk about adding it to your purchase.
Home Depot does not employ the installers. The work is performed by a network of local, independent, third-party contractors who are licensed, insured, and background-checked before they are authorized to take on Home Depot jobs. Home Depot vets the contractor and stands behind the work, but the person who shows up at your door works for the local contractor, not for Home Depot. That is why the experience and the price vary by market.
Scheduling takes a few days to a week. After you purchase the toilet and add installation, a licensed Home Depot installer contacts you to schedule the visit. Same-day installation is rarely available; scheduling typically happens within a few days to a week, depending on the contractor’s availability in your area. A standard swap takes about 90 minutes to 2–4 hours on site, including removal of the old toilet and connection of the new one to the existing plumbing.
The labor is backed by a one-year warranty. Home Depot backs its installation work with a one-year labor warranty against defects in the installation. Keep the paperwork: if the toilet rocks, leaks at the base, or the seal fails within that year, the warranty is your recourse, and it is one of the genuine advantages over hiring an unvetted handyman.
There is no fixed nationwide price. Home Depot does not maintain a single nationwide rate for toilet installation. Pricing varies by region, installer availability, and job complexity, which is why the ranges in this guide are wide — a base labor fee starting around $149–$150 in one market can be $269 in another, and the flat-rate basic installation typically runs $180–$400. Get the quote for your zip code before you commit, and get it in writing.
If the toilet replacement is part of a bigger bathroom project, our guide to the 10×10 bathroom remodel cost shows how a fixture swap fits into a full remodel budget. For the per-square-foot math across bathroom sizes, see our guide to bathroom remodel cost per square foot.
What’s Included — and What’s Not
The standard package covers the core work of a straightforward replacement. The trouble starts at the edges of that package, where the items most likely to be needed on an older bathroom — a corroded flange, a seized shut-off valve, a damaged floor — are priced as extras. Before you book, know exactly where the line falls:
| Item | Standard package | Notes |
|---|---|---|
| Removal of old toilet | Included | Standard installation includes removing the existing toilet |
| Disposal / haul-away of old toilet | Included in most reports; sometimes a separate $25–$30 charge | Confirm in writing — one customer report had it included in the $269 base; some markets charge separately |
| New wax ring and floor bolts | Included | Standard installation parts are part of the package |
| Setting the new toilet | Included | Leveling, bolting down, and seating on the wax ring |
| Connecting the supply line | Included | Connection to existing plumbing |
| Leak testing | Included | Installer tests for leaks before leaving |
| Cleanup | Included | Work area left clean |
| The toilet itself | Not included | Purchased separately, $100–$400 typical |
| Flange repair or replacement | Not included | $75–$200 extra |
| Shut-off valve replacement | Not included | $50–$100 extra |
| New supply line | Not included | $25–$75 extra if the old one is not reusable |
| Floor repair if rot or damage is found | Not included | $100–$500+ extra |
| Smart toilet electrical work (GFCI outlet) | Not included | $150+ for an electrician if no outlet within 3 feet |
| Plumbing or structural modifications | Not included | Priced per job |
| Drain clearing | Not included | Priced per job |
The three items most often missing. Flange repairs, shut-off valve replacement, and floor damage are the classic surprise charges on a toilet installation. The flange — the ring that bolts the toilet to the floor drain — is hidden under the old toilet, so nobody knows its condition until the old toilet comes off. If it is corroded or cracked, the installer will not set a new toilet on a bad flange, and the $75–$200 repair becomes a change order on the spot. If your shut-off valve is old, seized, or dripping, that is another $50–$100. And if the floor under the toilet is rotted from a slow leak, the $100–$500+ floor repair can dwarf the installation itself. None of this is a scam — it is genuinely unknowable until the old toilet is lifted — but it is why the $225–$500 all-in range is wider than the $179–$299 labor range, and why you should budget for at least one extra before you book.
Common Add-On Charges
Add-ons are where a $269 base install becomes a $320 total — or more. Here is what each one typically costs and when you are likely to face it:
| Add-on | Typical cost | When it comes up |
|---|---|---|
| Flange repair / replacement | $75–$200 | Corroded, cracked, or broken flange found under the old toilet |
| Shut-off valve replacement | $50–$100 | Old valve seized, dripping, or corroded |
| New supply line | $25–$75 | Old supply line worn, kinked, or the wrong length for the new toilet |
| Old toilet removal / disposal (if not included) | $25–$30 | Markets where haul-away is priced separately |
| Floor repair (rot or water damage) | $100–$500+ | Subfloor damaged by a long slow leak under the old toilet |
| GFCI outlet for a smart toilet | $150+ | No electrical outlet within 3 feet of the toilet; electrician required |
| Specialty toilet surcharge | $150 | Unusually heavy, wall-hung, or non-standard fixture |
| Drain clearing | Varies by job | Clogged or slow drain discovered during the swap |
A real-world example. One homeowner’s Home Depot install cost $269 for the base service, including removal and haul-away — and the total reached $320 once a flange fix was added. That is the most common story in customer reports: the base price is real, and one small repair on top of it is normal. A second report put the base at $225, with a $150 extra for a “specialty” toilet, for a $375 total before the cost of the toilet itself. Budget the base price plus $50–$200 for the most likely extra, and you will rarely be surprised.
Materials vs. Labor Breakdown for a Home Depot Toilet Installation
On a toilet installation, the fixture is usually the bigger share of the bill — which is the opposite of most plumbing jobs, where labor dominates. Here is how a typical basic two-piece replacement at $279–$499 installed breaks down:
| Cost component | Typical range |
|---|---|
| New toilet, basic two-piece | $100–$200 |
| Installation labor (Home Depot) | $179–$299 |
| Wax ring, floor bolts, standard parts | Included in labor |
| Old toilet removal and disposal | Included in most reports; $25–$30 if charged separately |
| Most likely add-on (flange or valve) | $50–$200 |
| Typical all-in total, basic two-piece | $279–$499 |
| Typical all-in total with one add-on | $329–$699 |
Labor runs $179–$299 for the installation alone, and it is the most predictable part of the bill: a standard swap is a 90-minute to 2–4-hour job at a flat rate, and the rate is set by your market, not by the hour. The fixture price is the more variable part — a basic two-piece at $100–$200 versus a smart toilet at $500–$2,000+ — because the toilet you pick is entirely your choice. The add-ons are the least predictable part, because they depend on what the installer finds under the old toilet.
What Affects the Cost of a Home Depot Toilet Installation
No two Home Depot toilet installation quotes are identical, because the price is built from your market, your toilet, and the condition of your bathroom. These are the factors that move it most:
Your local market. The $179–$299 labor range and the $180–$400 flat-rate range are wide for exactly this reason: the same standard swap costs more in a high-cost metro area than in a smaller market, because the local contractor’s rate follows local labor costs. The base labor fee starting around $149–$150 is a starting point, not a promise — your zip code sets the real number.
The condition of the flange. The flange is the single most common source of extra cost, at $75–$200 to repair or replace. It is also the most common reason a job takes longer than the quoted 90 minutes: a corroded flange has to be cut out and replaced before the new toilet can be set. If your old toilet has been rocking, leaking at the base, or smelling of sewer gas, expect the flange to need attention.
The shut-off valve and supply line. An old shut-off valve that will not turn, or turns and then drips, has to be replaced — $50–$100. A supply line that is kinked, corroded, or the wrong length for the new toilet’s inlet is another $25–$75. These are cheap parts with real labor attached, and they are the most common “while we’re here” charges on an older bathroom.
Floor damage. If the subfloor under the old toilet is rotted from a slow leak, the installer cannot set a new toilet on it. Floor repair runs $100–$500+ depending on how much subfloor has to be cut out and replaced, and it can turn a 90-minute swap into a multi-hour job.
Smart toilet electrical needs. A smart or bidet toilet needs a GFCI-protected outlet within about 3 feet. If there is no outlet near the toilet, an electrician has to add one — $150+ — and that is a separate trade from the plumber doing the installation. Check for the outlet before you buy the toilet, not after the installer arrives.
The contractor serving your area. Home Depot’s installers are independent local contractors, and only one or two may serve your market. Two homeowners in different cities can get very different “Home Depot” quotes for the same toilet, because they are really getting quotes from different companies — which is why customer reports vary so much, from $225 in one market to $269 in another.
Home Depot vs. Lowe’s vs. an Independent Plumber
| Home Depot | Lowe’s | Independent plumber | |
|---|---|---|---|
| Typical basic installation labor | $179–$299 (flat rate) | $180–$400 (flat rate); reported range up to $530 with extras | $150–$450 (labor) |
| Base labor fee | Starts around $149–$150 | Starts around $180 | Varies by plumber and market |
| Who does the work | Licensed local third-party contractor | Licensed local third-party contractor | The plumber you hire, or their crew |
| Toilet included? | No — buy separately, $100–$400 typical | No — buy separately | No — buy separately, or the plumber supplies it |
| Labor warranty | 1 year | 1 year | Varies by plumber |
| Scheduling | Typically a few days to a week | Similar — a few days to a week | Often faster; sometimes same-week or next-day |
| Time on site | About 90 minutes to 2–4 hours | About 90 minutes to 2–4 hours | About 90 minutes to 2–4 hours |
| How you book | Add installation at checkout or at the Service Desk | Add installation at checkout or at the Service Desk | Call or book directly |
| Best for | A one-stop buy-and-install with a warranty | A one-stop buy-and-install with a warranty | The cheapest labor, or a job with complications |
When Home Depot wins. You want to buy the toilet and the installation in one transaction, with a vetted contractor and a one-year labor warranty, and you do not want to find and vet a plumber yourself. At $179–$299 for labor, the Home Depot price is competitive with an independent plumber’s $150–$450 — it sits in the middle of that range, not at the top of it.
When Lowe’s wins. The two retailers are near-identical on this service: both use licensed third-party contractors, both charge a flat rate in the $180–$400 range, both back the work with a one-year labor warranty, and both require you to buy the toilet separately. One customer comparison put Lowe’s at $180 to $530 depending on extras, against Home Depot’s $269 base — essentially the same service at a similar price. Choose whichever store has the toilet you want in stock, or whichever quotes lower for your zip code.
When an independent plumber wins. An independent plumber’s labor runs $150–$450, and at the low end — $150–$200 for a straightforward swap — a local plumber can undercut both retailers. A plumber also wins when the job is complicated: a rotted floor, a flange that needs rebuilding, or a drain that needs clearing. The retailer model is built for standard swaps; a plumber is built for everything else. Get two quotes from local plumbers for the same scope before you book with a retailer, and compare the all-in totals — not just the labor line.
DIY vs. Hiring a Pro for a Toilet Installation
| DIY | Hiring a pro (Home Depot or plumber) | |
|---|---|---|
| Toilet cost | $100–$200 basic two-piece; $200–$400 one-piece | Same — you buy the toilet either way |
| Labor cost | $0 (your time) | $179–$299 (Home Depot); $150–$450 (independent plumber) |
| Parts (wax ring, bolts, supply line) | $50–$100 | Included in the labor price |
| All-in total, basic two-piece | $150–$300 | $279–$499 (Home Depot) |
| Time required | 2–4 hours for a first-timer; 90 minutes with experience | About 90 minutes to 2–4 hours on site |
| Tools needed | Adjustable wrench, level, putty knife, sponge, bucket, new wax ring ($5–$15) | Included in the labor price |
| Flange repair | You do it — $75–$200 in parts and time if the flange is bad | $75–$200, done by the installer |
| Leak testing | You test it — mistakes are on you | Professional testing, with a 1-year labor warranty (Home Depot) |
| Heavy lifting | You lift a 60–100 lb toilet, twice | The installer does it |
| Best for | A straightforward like-for-like swap by a confident DIYer | Any job with a bad flange, floor damage, or a smart toilet |
A toilet installation is one of the most DIY-friendly plumbing jobs in a house: the parts cost $50–$100 — a wax ring at $5–$15, floor bolts, and a supply line — and a straightforward swap is a 2–4-hour job for a first-timer. When DIY wins: the job is a like-for-like replacement, the flange is in good shape, the shut-off valve works, the floor is solid, and you are comfortable lifting a 60–100 lb toilet and setting it straight down onto a wax ring without rocking it. The saving is real — $150–$300 all-in against $279–$499 through Home Depot. When a pro wins: the flange is corroded, the floor is damaged, the shut-off valve is seized, or the toilet is a smart model that needs electrical work. A mistake on a wax ring seal means water in your subfloor, and there is no warranty to fall back on when you did it yourself.
Money-Saving Tips for a Home Depot Toilet Installation
1. Buy the toilet on sale, not on installation day. The toilet is the biggest variable in the total — a basic two-piece at $100–$200 versus a one-piece at $200–$400 — and Home Depot runs toilet promotions regularly. A $50 saving on the fixture is a $50 saving on the total. 2. Ask for the all-in quote before you book. The base labor fee starting around $149–$150 is not the total. Ask what the $225–$500 all-in range looks like for your zip code and your toilet, and whether removal and disposal, the wax ring, and the supply line are included or extra. 3. Check the flange and valve yourself first. If the toilet rocks, if there is water staining on the floor around the base, or if the shut-off valve will not turn, expect a $75–$200 flange repair or a $50–$100 valve replacement. Knowing before the installer arrives means you can budget for it. 4. Keep the toilet standard. A standard two-piece toilet at $100–$200 is the cheapest fixture and the cheapest install. A specialty toilet can add a $150 surcharge on the labor alone, before the higher fixture price. 5. Do not buy a smart toilet without checking for an outlet. A smart toilet at $500–$2,000+ needs a GFCI outlet within about 3 feet. If there is no outlet, an electrician adds $150+ to the job. Check for the outlet before you buy the toilet. 6. Get two local plumber quotes for comparison. An independent plumber’s labor runs $150–$450, and at the low end — $150–$200 for a straightforward swap — a local plumber can undercut Home Depot’s $179–$299. A five-minute phone call to two plumbers is the cheapest way to know whether the retailer’s flat rate is a good deal in your market. 7. Replace the supply line and valve while the toilet is off. If the valve is old or the supply line is worn, replacing them during the installation costs $25–$100 in parts and a few minutes of the installer’s time. Replacing them later means another service call. 8. Time the job outside the busy season. Plumbers and installers are busiest in spring and early summer. A fall or winter booking can mean a faster start date — scheduling is typically a few days to a week even in a normal season — and occasionally a better price from a local contractor. 9. Do the old-toilet haul yourself if it is charged separately. In markets where haul-away and disposal is a separate $25–$30 charge, you can save it by disposing of the old toilet yourself — most municipalities accept porcelain at a transfer station or a bulk pickup.
Before you commit to a scope, run the numbers through our bathroom remodel cost calculator — it will show how a fixture swap fits into the total project cost before you sign a contract.
Frequently Asked Questions
How much does Home Depot charge to install a toilet?
For a standard replacement where you buy the toilet separately, Home Depot’s installation labor typically costs $179–$299, and most customers report paying $225–$500 all-in for the service. The base labor fee often starts around $149–$150, and a flat-rate basic installation typically runs $180–$400 depending on your market and the fixture. The toilet itself is not included: a basic two-piece toilet adds $100–$200, so a complete job usually lands at $279–$499 in total.
Does Home Depot install the toilet itself?
No. Home Depot does not employ the installers. The work is performed by a network of local, independent, third-party contractors who are licensed, insured, and background-checked. Home Depot vets the contractor and backs the work with a one-year labor warranty, but the person who does the installation works for the local contractor, not for Home Depot.
Is the toilet included in Home Depot’s installation price?
No. The toilet is purchased separately, either online or in-store, and installation is added to the purchase. A typical new toilet costs $100–$400 — a basic two-piece $100–$200, a one-piece $200–$400, a comfort-height or elongated model $150–$350, and a smart or bidet toilet $500–$2,000+. The installation price covers labor, standard parts such as the wax ring and floor bolts, removal of the old toilet, and leak testing.
How long does a Home Depot toilet installation take?
A standard swap takes about 90 minutes to 2–4 hours on site, including removal of the old toilet and connection of the new one to the existing plumbing. Scheduling typically takes a few days to a week after purchase — same-day installation is rarely available. A job with a flange repair, floor damage, or a smart toilet’s electrical work takes longer.
What is included in Home Depot’s standard toilet installation?
The standard package typically includes removal and disposal of the old toilet, a new wax ring and floor bolts, setting the new toilet, connecting the supply line, leak testing, and cleanup, backed by a one-year labor warranty. It does not include the toilet itself, flange repair ($75–$200), shut-off valve replacement ($50–$100), a new supply line ($25–$75), floor repair ($100–$500+), or electrical work for a smart toilet ($150+ for an electrician).
The Bottom Line
For a Home Depot toilet installation in 2026, budget $179–$299 for the installation labor on a standard replacement, with most customers paying $225–$500 all-in for the service. The toilet itself is a separate purchase — $100–$200 for a basic two-piece, $200–$400 for a one-piece, $150–$350 for a comfort-height or elongated model, and $500–$2,000+ for a smart or bidet toilet — so a complete job with a basic two-piece usually lands at $279–$499 in total. One real customer report put the base install at $269 including removal and haul-away, with the total reaching $320 after a flange fix — and that is the most common story: the base price is real, and one small repair on top of it is normal. Buy the toilet first, get the all-in quote for your zip code in writing, check the flange and the shut-off valve before the installer arrives, and compare the retailer’s flat rate with two local plumber quotes — an independent plumber’s labor runs $150–$450, and at the low end it can undercut Home Depot. If the job is a straightforward swap, the Home Depot route is a fair deal with a one-year labor warranty; if the flange is bad, the floor is damaged, or the toilet is a smart model, a local plumber may be the better hire.
Prices are typical 2026 US ranges for planning purposes and vary by region, toilet choice, and site condition; get itemized local quotes for an exact project price.
2 thoughts on “How Much Does Home Depot Charge to Install a Toilet in 2026?”