How Much Will Home Depot Charge to Install a Door? 2026 Prices

How Much Will Home Depot Charge to Install a Door in 2026?

Wondering how much will Home Depot charge to install a door? Home Depot’s 2026 published installation-labor bands are: interior doors $178–$398, exterior/entry doors $398–$998, patio doors $478–$1,798, and storm/screen doors $98–$168 — labor only. The door itself is sold separately, and most homeowners spend an additional $75–$2,500+ on the door unit depending on type and material. That means a typical interior door installed through Home Depot runs $250–$600+ all-in, while a new exterior entry door with hardware usually lands between $800 and $2,500+ installed.

The trick is that Home Depot quotes door installation in two pieces: the door purchase and the installation service. The installation program is run through licensed local contractors in Home Depot’s network, and pricing is set in labor bands that vary by door type — not by a single flat rate. This guide breaks down exactly what each band covers, what the door itself costs on top, how the program works, what’s included (and what isn’t), and when hiring your own contractor instead is the smarter move.

Quick-answer table (typical 2026 Home Depot install labor, door sold separately):

Comparing Home Depot’s service programs? See our companion guide to how much Home Depot charges to replace a window — the pricing structure is the same labor-band model, which makes the two easy to compare.

How Much Will Home Depot Charge to Install a Door by Door Type

Home Depot’s published labor bands reflect how much work each door type actually takes — framing changes, weatherproofing, and security hardware all raise the price. Every figure below is the labor band (installation service only); add the door purchase price from the table above.

Interior doors: $178–$398 labor

A basic prehung interior door swap is the fastest professional door job — pull the old unit, set and shim the new prehung frame, trim it out, and hang the hardware. Home Depot’s $178–$398 band covers most standard 30″–36″ prehung replacements where the existing opening needs no reframing. Add the door itself ($75–$400 for hollow-core to solid-core), and typical all-in cost is $250–$600+ per door.

Slab-only replacements (reusing the existing frame) sit at the low end — less material cost, same-ish labor. Adding new door hardware typically adds $25–$150 per door for the lockset and hinges. If you’re replacing several interior doors at once, ask for multi-door pricing: setup and travel get spread across the job, often saving 10–20% per door.

Exterior/entry doors: $398–$998 labor

Exterior installation is a bigger job: the old frame comes out, the opening gets weatherproofed, the new prehung unit is set dead-level for security, flashing and sealant go on, and threshold work finishes it. Home Depot’s $398–$998 band covers a standard single entry door where no structural reframing is needed. Doors themselves run $300–$2,000+ — fiberglass and steel sit in the middle, wood and decorative glass units at the top — so typical all-in is $700–$3,000+.

Smart locks and deadbolts are usually add-ons: a standard deadbolt install runs $40–$100 in labor on top of the band, and a smart lock $75–$150. If your entry door is the home’s security weak point, the security premium for a properly installed steel or fiberglass unit is money well spent — a dead-level, shimmed, and sealed install resists forced entry far better than a rushed DIY job.

Patio doors: $478–$1,798 labor

Sliding and French patio doors are the widest jobs Home Depot’s program handles — big openings, two-person lifts, and heavy glass. The $478–$1,798 band reflects the range from a straightforward like-for-like sliding-door swap to a larger opening or French-door install needing reframing. Patio door units run $400–$3,500+, so all-in cost typically lands $900–$5,000+.

Energy performance matters here: patio doors are large glass surfaces, and a cheap unit costs you in heating and cooling every month. Ask about ENERGY STAR-rated units with low-E glass — the federal program’s door guidance explains what ENERGY STAR certification means for doors and how to read the label before you buy.

Storm/screen doors: $98–$168 labor

The cheapest Home Depot install — a storm or screen door hangs on the existing entry frame in under an hour for most homes. The $98–$168 labor band plus a $100–$500 door puts typical all-in at $200–$670+. Storm doors pay back in energy savings and entry-door protection, especially over a wood front door that takes weather directly.

How Home Depot’s Door Installation Program Actually Works

Understanding the process avoids surprises in the quote:

1. You buy the door at Home Depot (in-store or online) — the installation service is priced separately as a labor band, not bundled into the door price. 2. Free consultation / measurement. A contractor from Home Depot’s network visits, measures the opening, and confirms which labor band your job falls in. 3. The quote locks the band. You get the installation quote before work starts. If the opening needs reframing, rot repair, or subfloor work, that’s priced separately — this is where “the band” can grow. 4. A licensed, insured local contractor does the work. Home Depot’s installers are background-checked network contractors, not store employees, and the installation is backed by Home Depot. 5. Final walkthrough. Standard on entry and patio installs — verify the door swings and latches correctly, check the seal and threshold, and confirm cleanup before signing off.

This two-piece pricing (door + labor band) is exactly why the bands above are labor-only. When comparing quotes, always ask a local contractor for their all-in price including the door — then compare against Home Depot’s door price plus its labor band.

Cost Drivers: What Moves the Price Within Each Band

Every band is a range, not a fixed price. These factors decide whether you land at the bottom or the top:

1. Prehung vs. slab. Prehung (door + frame as one unit) is the standard install — faster and more reliable, which is why the bands assume it. Slab-only (door leaf only, reusing the frame) is cheaper in material but demands more precise fitting; not every opening qualifies. 2. Opening condition. A square, rot-free, standard-size opening is the band baseline. Reframing, rot repair around the frame, or widening the opening pushes you above the band — this is the most common quote surprise. 3. Door material. Steel is the budget security pick; fiberglass is the mid-range durability and insulation pick; wood is the premium pick. Material choice sets the door price, not the labor band — but heavier doors (solid wood, iron-look) can push labor toward the top. 4. Hardware. Locksets, deadbolts, and smart locks are typically add-ons: $25–$150 per door for hardware plus install labor. Multi-point locking on French doors adds more. 5. Energy and glass options. Low-E glass, insulated cores, and ENERGY STAR certification raise the door price $100–$400+ but cut energy bills — worth it on exterior and patio doors. 6. Region and access. Labor bands reflect national typicals; high-cost metros skew toward the top of each band, and second-story or hard-to-access openings add handling time. 7. Number of doors. Multi-door jobs spread the trip, setup, and measurement cost — per-door labor typically drops 10–20% on batches of three or more.

DIY vs. Hiring Home Depot (or a Local Pro)

The honest take: storm doors are the one genuinely DIY-friendly install in the program — an hour, a drill, and the included template get it done. Interior prehung doors reward experience but punish beginners; a door that’s out of plumb will never latch right and you’ll hear about it daily. Exterior and patio doors are where the program earns its labor band: weatherproofing and security installation are unforgiving of shortcuts.

For the independent-pro comparison, always get three written quotes the same way you would for window replacement cost for one window — the Home Depot band is your benchmark, not your only option.

Money-Saving Tips

• Batch multiple doors. Interior doors especially reward bundling — three doors in one visit spreads the setup cost and typically cuts per-door labor 10–20%.
• DIY the storm door. At $98–$168 in labor for a one-hour job with a template, this is the program’s easiest money to keep in your pocket.
• Buy during door sales events. Home Depot runs periodic door promotions; the door price is the biggest lever on total cost, so time the purchase if you can wait.
• Get the band in writing before work starts. The quote locks your labor cost — but rot repair, reframing, and structural surprises are extra, so confirm in writing what’s inside the band and what’s not.
• Compare against three local quotes. A licensed local contractor may beat the Home Depot band, especially on interior doors — use the band as your benchmark, not your default.
• Keep the opening standard. Custom-size doors add 20–50% to the door price and push labor to the top of the band. If the opening is already standard, don’t create a custom job.
• Choose fiberglass for exterior value. Steel is cheapest, wood is prettiest, but fiberglass gives the best durability-per-dollar and insulation — and it resists the denting that ages steel doors.

Frequently Asked Questions

Does Home Depot install doors purchased elsewhere?

No — Home Depot’s installation program is tied to doors purchased through Home Depot. If you already own the door, you’ll need an independent contractor. The labor bands above apply only when the door is bought from Home Depot and installed through its network.

How long does Home Depot door installation take?

Most interior doors take 1–2 hours each once the installer is on site. A standard exterior entry door typically takes half a day (3–5 hours). Patio doors and jobs needing reframing or rot repair can take a full day or more. Lead time from consultation to install day is usually 1–3 weeks, longer for custom-size doors.

What’s included in Home Depot’s installation labor band?

The band covers removing the old door, setting the new prehung unit level and plumb, shimming, insulating around the frame, interior and exterior trim work as quoted, hardware installation, and cleanup. It does not cover reframing, rot or subfloor repair, structural work, painting or staining, or custom-size surcharges — those are quoted separately.

Is Home Depot door installation backed by a warranty?

Yes — installation through Home Depot’s program is backed by Home Depot, and the installers are licensed, insured, background-checked local contractors. Confirm the specific warranty terms (typically covering workmanship for a defined period) in writing before work starts, since terms can vary by market and contractor.

Is it cheaper to have Home Depot install a door or hire a local contractor?

It depends on the door type. For interior doors, an independent pro often comes in slightly under the $178–$398 band. For exterior and patio doors, Home Depot’s $398–$998 and $478–$1,798 bands are usually competitive with local quotes once you add the door cost in both cases. The real answer: get three written quotes from local pros, add the door price to each, and compare the all-in total against Home Depot’s door-plus-band total.

The Bottom Line

How much will Home Depot charge to install a door in 2026? For installation labor alone: interior doors $178–$398, exterior/entry doors $398–$998, patio doors $478–$1,798, and storm/screen doors $98–$168 — with the door itself sold separately on top. Realistic all-in totals: $250–$600+ for an interior door, $700–$3,000+ for an exterior entry door, $900–$5,000+ for a patio door, and $200–$670+ for a storm door. The two-piece pricing (door purchase + labor band) means you should always compare the all-in total — not just the band — against three local contractor quotes. DIY the storm door, bundle interior doors, and get the band locked in writing before the installer shows up; the most common overpay is reframing or rot repair quoted as an afterthought instead of part of the plan.

Prices are typical 2026 US planning benchmarks based on Home Depot’s published door-installation labor bands and national contractor pricing data; the door unit is sold separately and your actual total depends on region, door material and size, opening condition, hardware choices, and any reframing or repair work. Always get the labor band and any extras confirmed in writing before work begins — and compare against at least three written quotes from licensed, insured contractors before committing.