How Much Does 100 Ft of Vinyl Siding Cost in 2026?
If you are pricing a small repair, a single wall, or a shed, here is the short answer to how much does 100 ft of vinyl siding cost in 2026: one “square” of vinyl siding — industry shorthand for 100 square feet of wall coverage — typically costs $350–$700 installed, or $100–$300 for materials only. Labor adds roughly $150–$400 per square, and trim, tear-off, and disposal can push a small job higher per square foot than a whole-house project, because minimum charges apply.
The first thing to clear up is what “100 ft” means in a siding quote. Contractors and suppliers quote siding by the square (100 sq ft of wall area), not by linear feet of panel. A box of vinyl panels may be labeled by its coverage in squares, and a quote for “100 ft” almost always means one square. If your project is genuinely 100 linear feet of wall length, the wall area depends on wall height — a 100-linear-foot wall at 8 feet tall is 800 sq ft, or 8 squares. This guide covers both readings so you can match the quote to your actual project.
Quick-answer table (typical 2026 costs):
| Item | Typical cost |
|---|---|
| 100 sq ft vinyl siding, materials only | $100–$300 |
| 100 sq ft vinyl siding, labor only | $150–$400 |
| 100 sq ft vinyl siding, installed (materials + labor) | $350–$700 |
| Insulated vinyl, 100 sq ft installed | $500–$1,000 |
| Premium vinyl, 100 sq ft installed | $450–$900 |
| Old siding removal, per square | $60–$175 |
| Trim and accessories, per square | $50–$150 |
| Minimum service charge, small repair job | $300–$800 |
| 100 linear ft of wall, 8 ft tall (800 sq ft) vinyl installed | $2,800–$5,600 |
100 Ft of Vinyl Siding Cost by Panel Grade
Not all vinyl panels cost the same, and the grade on your quote matters more than the brand name. Panel thickness is the honest quality signal: economy panels are about .040 inch thick, mid-grade panels .042–.044 inch, and premium panels .046 inch or thicker.
| Panel grade | Thickness | Materials per square | Installed per square |
|---|---|---|---|
| Economy / builder-grade | .040 inch | $100–$180 | $350–$550 |
| Mid-grade / standard | .042–.044 inch | $150–$250 | $450–$700 |
| Premium | .046 inch+ | $200–$300 | $550–$900 |
| Insulated (foam-backed) | .046 inch+ with foam | $250–$400 | $500–$1,000 |
| Cedar-shake look vinyl | Varies | $250–$450 | $600–$1,100 |
Economy panels ($350–$550 installed per square) are the cheapest way to cover a wall, and the right choice for a shed, a rental, or a wall nobody sees. They dent more easily, fade faster, and ripple in high wind. For a front-facing wall on a home you plan to keep, they are a false economy.
Mid-grade panels ($450–$700 installed per square) are the sweet spot for most homeowners: noticeably stiffer, better color retention, and a longer warranty than economy panels, for a modest price jump. If your quote does not name a thickness, ask — a mid-grade panel at an economy price is the most common siding upsell in reverse, and a quote that hides the grade cannot be compared fairly.
Insulated vinyl ($500–$1,000 installed per square) adds a foam backing that improves impact resistance, makes the wall feel more solid, and adds a small amount of insulation value. It will not transform your energy bills on its own, but on a wall that already needs new siding, the upgrade cost is reasonable.
What Is Included in a Per-Square Vinyl Siding Price?
A complete installed price per square should include the panels, starter strips, J-channels, and fasteners. What it often does not include — and what turns a $500-per-square quote into a $750-per-square bill — is listed below.
| Extra | Typical cost per square or per job |
|---|---|
| Old siding tear-off and disposal | $60–$175 per square |
| House wrap replacement | $40–$100 per square |
| Sheathing repair (per sheet) | $75–$150 |
| Corner posts, trim, and soffit | $50–$150 per square |
| Window and door flashing/trim | $100–$300 per opening |
| Scaffolding (two-story walls) | $300–$800 per job |
Small jobs carry a minimum charge. A contractor will not mobilize a crew, set up, and warranty a one-square repair for $350 — expect a $300–$800 minimum on small repairs, which is why a single damaged wall panel is often cheapest as a DIY fix if you can match the panel profile and color.
How Much Vinyl Siding Do You Actually Need?
Siding is sold by the square, but you should order 10% extra for cuts, waste, and future repairs. The math for common small projects:
| Project | Wall area | Squares needed (with 10% waste) | Typical installed cost |
|---|---|---|---|
| One 12 ft × 8 ft wall | 96 sq ft | 1.1 squares | $400–$800 |
| One 20 ft × 8 ft wall | 160 sq ft | 1.8 squares | $650–$1,250 |
| Small shed, 10 ft × 8 ft walls | ~320 sq ft | 3.5 squares | $1,250–$2,450 |
| Single-story 1,500 sq ft house | ~1,300–1,600 sq ft | 14–18 squares | $6,000–$12,000 vinyl |
| 100 linear ft of 8 ft wall | 800 sq ft | 8.8 squares | $2,800–$5,600 vinyl |
If your “100 ft” is a linear measurement, measure wall height before ordering: the same 100 linear feet at 10-foot ceilings is 1,000 sq ft (10 squares, $3,500–$7,000 installed), not 800. This is the most common ordering mistake on small siding jobs, and it is why contractors measure wall area on site rather than trusting a linear figure.
For a full-house picture, see our companion guide on how much it costs to side a 1500 square foot house.
Cost Drivers: What Actually Moves the Per-Square Price
Wall condition. Straight, flat walls with sound sheathing are fast to side. Wavy walls, rotted sheathing, and failed flashing slow the crew and add repair charges per sheet.
Height and access. Ground-level walls are cheapest. Second-story walls need scaffolding or pump jacks, which add $300–$800 to a small job and slow production.
Profile and color. Standard horizontal lap panels are cheapest. Vertical siding, board-and-batten, and shake profiles cost more per square and take longer to install. Dark colors cost more and fade faster in strong sun; lighter colors hold up better and cost less over the panel’s life.
Region. Labor rates vary widely: expect per-square labor at the low end in lower-cost markets and 30–50% higher in high-cost coastal metros. Material prices are more uniform nationally, so most of the regional difference is labor.
Removal and disposal. If old siding must come off, add $60–$175 per square plus disposal fees. Asbestos-cement siding is the exception: it requires licensed abatement, which costs far more and must never be a DIY tear-off.
DIY vs. Hiring a Pro
| DIY | Pro | |
|---|---|---|
| 100 sq ft vinyl, materials | $100–$300 | Included in $350–$700 installed |
| Tools needed | $150–$400 (snips, level, nail gun or hammer, brake rental optional) | Included |
| Time for one square | 2–4 hours for a first-timer | 1–2 hours |
| Warranty | Materials only | Materials + workmanship |
| Biggest risk | Nailing panels too tight (buckling), bad flashing at windows | Minimum charges on tiny jobs |
Vinyl is the most DIY-friendly siding material, and a one-square repair or a single wall is a realistic weekend project if you can match the existing panel profile and color — bring a cut sample to the supplier, because faded panels never match a new box exactly. The critical technique is nailing loosely: drive nails in the center of the slot and leave about 1/32 inch of play so panels can expand and contract. Nailed-tight panels buckle in summer heat, and that is the single most common DIY siding failure. The Vinyl Siding Institute’s installation guidance covers nailing, flashing, and expansion gaps in detail and is worth reading before your first wall.
Money-Saving Tips
1. Order 10% extra and keep a spare box. A future repair with a matching panel costs $100–$300; a repair with a discontinued profile costs a whole wall. 2. Match before you buy. Take a sample panel to the supplier — color and profile matching beats a guess every time. 3. Bundle small repairs. One mobilization for several walls beats paying a minimum charge three times. 4. Do the tear-off yourself only if it is safe. Standard vinyl tear-off is DIY-able; asbestos-cement, lead-painted, or rotted siding is not. 5. Choose mid-grade over economy for visible walls. The per-square jump is small; the lifespan and appearance difference is not. 6. Get the grade in writing. A quote that names panel thickness and profile can be compared; a quote that just says “vinyl siding” cannot.
Frequently Asked Questions
Is 100 ft of vinyl siding one square?
In siding quotes, yes: one square means 100 square feet of wall coverage. If you mean 100 linear feet, convert with wall height first — 100 linear feet at 8 feet tall is 800 sq ft, or 8 squares.
How much does a box of vinyl siding cost?
A standard carton covers about 200 sq ft (2 squares) and costs roughly $200–$600 depending on grade and profile, before trim and accessories. Insulated and shake-profile cartons cost more and cover less per box — check the coverage printed on the carton, not just the price.
Can I replace just 100 sq ft of vinyl siding myself?
Yes, if you can match the profile and color and the wall underneath is sound. Budget $100–$300 in materials plus basic tools, nail loosely in the slot centers, and flash carefully around any windows in the section.
Why does a small siding job cost more per square foot than a whole house?
Minimum charges. Crew mobilization, setup, and warranty cost the same whether the job is one square or twenty, so small jobs carry a $300–$800 floor that raises the per-square average.
How long does vinyl siding last?
Typically 20–40 years, depending on grade, color, sun exposure, and installation quality. Premium panels in mild climates reach the top of that range; economy panels in harsh sun reach the bottom.
The Bottom Line
Budget $350–$700 installed per 100 square feet of vinyl siding — $100–$300 in materials and $150–$400 in labor — and remember that small jobs carry a minimum charge that raises the per-square average. If your “100 ft” is linear, convert it with wall height before ordering, because 100 linear feet of 8-foot wall is 800 sq ft, not 100. For visible walls on a home you plan to keep, mid-grade panels are the value pick; for a shed or a hidden wall, economy panels do the job. Get the panel grade, profile, and trim scope in writing, and you will be able to compare quotes honestly instead of guessing which one left something out.
For a full-home vinyl replacement, see our guide to vinyl siding replacement.
Prices are typical 2026 US ranges for planning purposes and vary by region, panel grade, and wall condition; get itemized local quotes for an exact project price.
1 thought on “How Much Does 100 Ft of Vinyl Siding Cost in 2026?”